µtorrent 1.8 (build 11813) leecher pack
NEW!!! based on the final µtorrent 1.8 build 11813
Included mods:
µtorrent 1.8__mult10_leecher.exe
µtorrent 1.8__mult11_leecher.exe
µtorrent 1.8__mult10_seeder.exe
µtorrent 1.8__mult11_seeder.exe
µtorrent 1.8__mult100_leecher.exe
µtorrent 1.8__mult101_leecher.exe
µtorrent 1.8__mult111_leecher.exe
µtorrent 1.8__mult100_seeder.exe
µtorrent 1.8__mult101_seeder.exe
µtorrent 1.8__mult111_seeder.exe
µtorrent 1.8__fakeup1x_leecher.exe
µtorrent 1.8__fakeup2x_leecher.exe
µtorrent 1.8__fakeup5x_leecher.exe
µtorrent 1.8__fakeup8x_leecher.exe
µtorrent 1.8__fakeup1x_seeder.exe
µtorrent 1.8__fakeup2x_seeder.exe
µtorrent 1.8__fakeup5x_seeder.exe
µtorrent 1.8__fakeup8x_seeder.exe
µtorrent 1.8__noreport.exe
µtorrent 1.8__report.exe
µtorrent 1.8__stealth.exe
CALL HOME IN ALL MODS REMOVED !!!
Feature list for each mod and IP filter updater included! DHT always can be always enabled!
Download µtorrent 1.8 build 11813 LP (4479 hits)
Download Language Pack (1408 hits)
pass: seba14
Don’t use SB-I crap! Their mods send every time the same key=FC581AFA and why are the files 1.4 MB huge? Good bye for your accounts :-)
August 10th, 2008 at 2:57 pm
Thanks.
August 10th, 2008 at 4:13 pm
Big Thanks
All seeder mods crush
Please fix
i use vista
August 10th, 2008 at 4:17 pm
hi seba,and the stealth mode where is? :-(
August 10th, 2008 at 4:28 pm
nice!!!
10X!
August 10th, 2008 at 4:38 pm
seba, thx
best leecher’s pack! quick as always! :D
August 10th, 2008 at 5:43 pm
Good work for getting it out so fast !
However, i can’t seem to get any of the modded versions to work.
They all crashed with a memory read error.
Only the original unmodded version works :(
anyone else have this problem ?
i’m running it on windows xp sp2
August 10th, 2008 at 7:04 pm
Bugfix version online, but ut 1.8 is very unstable
August 10th, 2008 at 7:28 pm
Working Perfectly now !
Thank you very very much ! Seba14 FTW !
August 10th, 2008 at 8:04 pm
seba14 - you’re the best! Thank you very much for speed.
August 10th, 2008 at 9:19 pm
Please make stealth mod. Need very much. Thanks.
August 10th, 2008 at 9:35 pm
stealth mod included from now
August 11th, 2008 at 12:14 am
Is it possible to enable DHT in All the mods ?
In 1.7.7 DHT was enabled by default ?
Thank you Seba for your great work - as always ! :)
August 11th, 2008 at 11:37 am
i will add a second pack with DHT enabled mods
August 11th, 2008 at 3:50 pm
seba14…
can you add build with 11x instead of 10x upload multiplikator..
or something like that?
someone req this before, but with no response..
this is better because, tracker mods/admins always see that you urpload speed ended with “0″ when using 10x.. it’s a bit suspicious?
August 11th, 2008 at 8:47 pm
11758? already? thanks!
August 12th, 2008 at 9:49 am
———————————————–
That is not true because the download/upload speed is actually in 2 decimal places even though they show 0 decimal places. So like when it says 100kbps it’s actually say 100.21 kbps, x100 = 10021kbps
August 12th, 2008 at 8:27 pm
SB-I mods contain BackDoor.W32.SdBot.czl :-)
Check it on http://virusscan.jotti.org/
August 12th, 2008 at 9:47 pm
Hello seba14…
First I want to thank you for your great job!
I have a little problem with your utorrent 1.8_multi10_leecher…
When I’m finishing download my file utorrent 1.8_multi10_leecher don’t send any info to tracker that I downloaded and finished downloading that file - I don’t figure in a “everyone that download” list on my tracker - why? - is this a bug or something (maybe stealth is active and you overlook a mistake?)…
In utorrent 1.7.7_multi10_leecher this problem don’t occurs and all was fine…
Am I don’t understand something or what?Please respond and help me - sorry for bad english…
August 13th, 2008 at 3:27 am
hi, seba14 i never understand why you put DHT always enabled?
what is improve?
because most of the trackers BAN on using this.. Torrentleech for example.
this is why i afeared to use this..
have any possibility to get BANNED because of DHT ?
thanks.
August 13th, 2008 at 4:54 am
the ip filter does not work. it doesn’t catch anything. to make sure i used your 1.7.6 mod and it was blocking ips. i use the same program and identical lists for both. anyone else have this problem or is it something on my end.
August 13th, 2008 at 8:15 am
ignore my comment problem fixed, i’m an idiot
August 13th, 2008 at 8:32 am
@ozz.dor: By default DHT can not be enabled for torrents on private trackers. With my mods it is possible, but you can not be banned because of it. If you are angry let DHT disabled for your torrents
August 13th, 2008 at 9:14 am
i update to µtorrent 1.8 (build 11758) leecher pack today and i cannot connect to my tracker. it keeps saying that “Failure: Missing key: left”, i did get this message or any problems w/ 1.7.7. Any solutions? Thanks
August 13th, 2008 at 2:28 pm
@seba14 please help…
In my opinion it’s something strange with “complete flag not send to tracker (no snatchlist entry)” function or “download not reported to tracker” and I don’t know how but it’s look like those functions are in utorrent 1.8_multi10_leecher…Maybe in utorrent 1.8_multi10_leecher something is somehow oversight by you @seba14?
Still when I’m finish download my files utorrent 1.8_multi10_leecher is not sending any info to my tracker and tracker don’t put me into “everyone that download” list and in my profile I don’t see those downloaded files…
Can you check this somehow please?
August 13th, 2008 at 2:56 pm
seba14: can you pls disable this in leecher mods:
August 14th, 2008 at 12:08 am
µTorrent 1.8 Build 11813 Relased.
— 2008-08-13: Version 1.8 (build 11813)
- Fix: do not check routing for IPs when a proxy is in use
- Fix: replace backslashes in file paths for multifile URL seeding with forward slashes
- Fix: incorrect bencode key sorting on keys where one is a subset of the other
August 14th, 2008 at 3:50 am
seba14 thanks but i don’t totally understand you
if DHT cannot be enabled for a torrent on prative site
why few trackers like torrentleech WARN for
“check if DHT is disebled in your client else you will get BANNED”
and anyway what the DHT is actually ? what it’s improve?
thanks..
August 14th, 2008 at 8:41 am
@MarekPL: a new version is on the way based on build 11813
@ozz: read this: http://www.utorrent.com/faq.php#What_is_DHT.3F
August 14th, 2008 at 9:51 am
thx for upload
I have two questions.
µtorrent 1.8__fake2x_seeder.exe so My original upload speed 30k, then with this 60k will be?
August 14th, 2008 at 10:09 am
seba14 please Disabled “anti-leech protection”
http://www.utorrent.com/faq.php?client=utorrent1800#What_does_Download_Limited_in_the_status_bar_mean.3F
August 14th, 2008 at 11:53 am
@danitm: if you have 30k upload 230k will be reported to tracker
August 14th, 2008 at 12:18 pm
Please help- i get HTTP error 400 on all my torrents after downloaading the new version 11758
August 14th, 2008 at 5:49 pm
Finally you got around to doing 1.8. Thanks alot Seba :)
August 14th, 2008 at 8:56 pm
some bug fixes and new mods included in the new ut 1.8 build 11813 LP
August 14th, 2008 at 9:21 pm
@seba14: ThX for great work!!!
August 14th, 2008 at 11:09 pm
WOW!
NICE 1!
10X!
August 15th, 2008 at 5:06 am
@seba14: i read it, but i still not understand if the DHT can’t work when ‘private flag is on’ so why all the private trackers write in
the sites something like “lately many users got banned because DHT enabled so be sure that your client is DHT disabled because DHT enabled will get you banned”?
you are 100% sure that the DHT could not result me ban ?
August 15th, 2008 at 5:23 am
@seba14: (sorry for the double) but this can help
for example TL Faq: “DHT must be disabled in your client, DHT can cause your stats to be recorded incorrectly and could be seen as cheating also disable PEX (peer exchange) Anyone using this will be banned for cheating the system.”
why they say this ?
August 15th, 2008 at 9:16 am
@ozz: private tracker send a private flag so it isn’t possible to activate DHT. My mods ignore the flag and so it is possible to activate DHT, but it is NOT activated by default.
the tracker can not see if DHT is enabled or not. but you send send also the upload and download stats from peers that are not registered on tracker. if you want to send always the correct stats, you should never used leecher mods!
August 15th, 2008 at 11:09 am
sorry..i can’t use it. click the setup.exe,and it says error.
can u solve the file problem??
August 15th, 2008 at 12:57 pm
@vipkkk999: download & try it again.
August 15th, 2008 at 1:05 pm
@seba14
i’ve tried it many times,but it doesnt work.. the setup.exe ,i click, error.again and again.
could u please give the .rar???
August 15th, 2008 at 5:53 pm
@seba14: thanks for your help, sorry that i madden you..
i don’t care it’s dosen’t send the correct stats, but if it’s seend also the upload and download stats from peers that is not registered on tracker
so the tracker’s anti cheat system (or something like that) can’t recognize that i’m report that user with XXX passkey (that doesn’t exist) download from me XX MB
so the system can’t see he isn’t registered and ban me ?
thanks.
August 15th, 2008 at 7:16 pm
I’m not sure if the fakex8 mod (the only one I’ve tried so far) works. I’m downloading in a private tracker and when I check the speed I’m reporting it shows like ~8,5 kb/s. I’m pretty sure I’m not uploading at 0,5 kb/s and even doing that the speed should be ~80,5 kb/s and not 8,5 and the amount uploaded also corresponds to 8,5.
Can anyone give some feedback about this?
August 15th, 2008 at 10:48 pm
Seba14
Great thanks for your work from Belarus :)
With our poor internet your mods are the only decision.
We have a one big question to you. Would you be so kind, to disable this “anti-leech protection” in your mods?
August 16th, 2008 at 3:04 am
BUG!
µtorrent 1.8__noreport.exe -> works as “you shown as seeder”
August 16th, 2008 at 5:15 am
Is there a certain way to get Noreport/stealth/report/fakeup 2x seeder/etc to work without using original first to connect to peers? I have never been able to get No Report to work without launching Original first.
August 16th, 2008 at 2:53 pm
Thanks for the release seba14. I gotta wonder though, what was wrong with the previous exe method? I prefer that one instead, it is the Ultimate after all. I liked their old icon too haha.
August 16th, 2008 at 4:12 pm
Guys, i tried few of the utorrent versions, but i can not download, most of the errors are- HTTP 400 and HTTP 500 , does somebody else have similar problems?
I did send a link to an uploaded photo - screenshot of the problem, , but it seems my post has been deleted
August 16th, 2008 at 4:15 pm
gr8 work seba14, for all the ppl pls stop asking for disabling “anti-leech protection” this mod from mine point of view is for giving mutch as you can and not being banned becouse you don`t want to pay for VIP acees or don`t have soo fast upload… and for ppl that wants to share NOTHING! than pay for news, rapidshare or private trackers VIP access
I can belive that anyone have less than 8kb/s upload so he must disable all upload!
August 16th, 2008 at 11:49 pm
is it just mistype in NFO
and it should be seeder as Bad_Man said?
or it actually showing you as a leecher?
August 17th, 2008 at 4:37 am
@zeljkoni
But in uTorrent 1.7.7 there was no this “anti-leech protection”, and everybody was just fine.
August 17th, 2008 at 5:40 pm
Thank you @seba14 - from now (build 11813) it’s all working fine for me.
August 18th, 2008 at 1:40 pm
Oh and one more thing @seba14 - can you release utorrent 1.8_multi10_leecher and if necessary other mods with disabled “Local Peer Discovery” and “Peer Exchange” options?Is this possible?Thank you…
August 18th, 2008 at 6:31 pm
Please ignore my comment above…I help myself and disable those options in “Properties” - “Other properties” of my downloaded or seeded torrent…
Sorry for annoying you @seba14.
August 19th, 2008 at 1:43 am
@seba14, could you please respond something aboud disabling “anti-leech protection”?
August 19th, 2008 at 8:32 am
Great work !
Thanks seba :)
August 19th, 2008 at 10:11 am
@Ripper47: I will try something, but it needs time……
August 19th, 2008 at 11:43 am
@ek, your HTTP 400 errors can be because of NOD32 IMON (If you’re using NOD32). Version 1.8.1 Beta (Build 11882) released and they fixed this issue in this build. You can try to disable IMON when using utorrent.
August 19th, 2008 at 3:36 pm
Changes in Version Version 1.8.1 beta (build 11882), 2008-08-18:
- Feature: 2x faster hashing
- Feature: Open Containing Folder for Files tab
- Change: sort torrents without ETA after torrents with infinity
- Change: remove “Download Limited” behaviour
- Change: turn sparse files off by default, due to fragmentation issues
- Change: relax min_interval restriction on manual updates to 60 seconds if the last tracker request failed
- Change: store hash of the webui password instead of plaintext
- Fix: force non-sparse with preallocate on
- Fix: ‘hostname not found’ on NT4
- Fix: slow load with lots of torrents that point to a dead/missing drive
- Fix: Some checkboxes overlapping others in the connection section of preferences
- Fix: work around NOD32 IMON bug (HTTP 400)
Lots of great additions. If you could make a leecher pack update with this Seba it’d be great ^^
August 19th, 2008 at 7:59 pm
hm.. for some reason the 1x and 11 multi don’t report download stats. now i have a 1gb uploaded and 0 downloaded on private tracker, for a million : 1 ratio.
the fake upload works great though! =D thanks
August 20th, 2008 at 9:52 am
this site asked me to register and now i can access some of the managing panels in this blog. weird. and i wanted to do is thank you and ask for feature:
is it possible to know my fake upload rate? so i wouldnt have to hope that it works and i could go and download quietly without warrying if ill get banned?
August 20th, 2008 at 2:48 pm
Menes, thank you for the reply. But i am usingg zonealarm , not the NOD32. I get these errors- HTTp400 HTTP 500 , hostname not found, offline(timed out) . SINCE THE LAST VERSION NONE OF MY TORRENTS WORK. iF I USE THE ORIGINAL UTORRENT, EVERYTHING WORKS, but not with the last two versions from seba14. Please somebody help, you may send me an email to bgboy@ananzi.co.za
August 20th, 2008 at 7:28 pm
ok, now i noticed it uploads as it should, now another question, and very important one - what does the client fake (in the fake *X clients)? the global upload, or every task upload? i mean, lets say i use 8X:
if i upload in 6 tasks at the same time, each one of them at 0.1, ill get
80.1 * 6, but if its global, it would be 80.6. its important.
August 21st, 2008 at 7:06 pm
also what mean stealth & noreport
please !!
August 22nd, 2008 at 2:11 pm
@Morisato: waiting for the final
August 23rd, 2008 at 12:13 am
seba, please answer my question. is it global or per task?
August 23rd, 2008 at 1:10 pm
the fake upload is for every active task/torrent.
August 24th, 2008 at 12:22 am
Thanks for your reply Seba :) I will wait with you ^^
August 24th, 2008 at 3:06 am
There are some problems with this pack. I tried your previous pack (1.7 beta) and it works OK, but with this new version, depending on the exe used, THERE ARE LOT OF PROBLEMS, (utorrent cant find…. etc)
but, good work seba14
P.D.- i know the emule mod you must use depends on your PC characteristics and Speed connection and…. but, although you use torrents harder than ed2k, can you suggest your prefered emule mod, seba14 ¿?¿?
THANKY
August 24th, 2008 at 7:02 am
Right then, answered my question as well, thanks…
August 25th, 2008 at 2:54 pm
seba14 please reply to why stealth mods and noreport clients not working properly.
August 25th, 2008 at 8:32 pm
i’m having a bit of a problem downloading this. i think there’s something wrong with my connection. could someone please PM me or something with a mirror link? any server/FTP will do (RS would be awesome, but any will do).
thanks for another great “product” xD
August 25th, 2008 at 8:40 pm
@rager, it’s based on the tracker software
August 26th, 2008 at 3:15 am
@seba14, why when i use NoReport i am shown on the tracker as SEEDER? I want to be shown as leecher…
August 26th, 2008 at 8:31 am
@rager, will be fixed in next version based on ut1.8.1
August 28th, 2008 at 12:35 am
@seba14, whether “anti-leech protection” will be removed in next version based on ut1.8.1?
And please, answer to my question about “Noreport” mod, if you have time.
August 28th, 2008 at 4:21 am
seba;
you are “Torrent King©™
This is my first post, though i’ve been using your “Mods” for over a yr now.
So many options now since 1.7.5
Say for someone like myself who leaves it running over nite , Naturally I want the quickest speed, and so long as I get my file i’m seeding away.
which version of this package would suite me best ?
September 3rd, 2008 at 1:26 pm
Hi seba and all
I was just wondering whats the most safe .exe to use from the utorrent leecher pack in private trackers like torrentbytes, revolutiont, bitsoup, bitmetv, etc without getting banned?
September 10th, 2008 at 12:30 am
can u makes new mod like multi x upload_ original ?
thanks man for ur help
September 10th, 2008 at 6:23 am
With ADSL internet your mods are the only decision.
Thanks!
Greetings from Bucharest.
September 10th, 2008 at 11:11 pm
seba14
i do not see ur reply about my opinion
urs
mmmmm
September 11th, 2008 at 9:42 am
multi x is not possible because of the closed sourcecode
September 11th, 2008 at 11:54 am
what about multi 10 with original is it possible?
all i want that to appeare on tracker as my status seeds and leech in the same time with multi 10 upload .i hope u understand me
urs
mmmmm
September 12th, 2008 at 8:54 pm
hmmm i can’t download it ut 1.8 why?
September 13th, 2008 at 12:25 am
@seba14, could you please release some kind of patch or fix for removing anti-leech protection? This thing is realy horrible…
September 30th, 2008 at 5:52 pm
seba14,
how about enabling manually “Update Tracker”? the newer ut disables the menu, and follows the trackers update time.
October 2nd, 2008 at 10:10 am
Stealth works with torrentleech or can identify it and ban you?
October 7th, 2008 at 11:31 am
µTorrent v1.8.1 (build 12616) Stable
Just wanted to let you know Seba that the new stable is out ^^
Hope to see your update pack soon.
October 7th, 2008 at 9:27 pm
new version of leecher pack already released